Description, Specifications for U-Reach PV1200 1:11 M.2 Duplicator
U-Reach PV Series PCIe NVMe M.2 Duplicator (PV1200 1:11 Duplicator)
- 1 source :11 Targets
- 9-12 Gb/min
- Supports both SATA and NVMe M.2 ( with Cross signal duplication)
The U-Reach PV Series is a professional-grade PCIe NVMe M.2 duplicator, specifically engineered for high-volume duplication tasks. Utilizing advanced multitasking technology, it can simultaneously duplicate up to 23 PCIe M.2 targets at an impressive speed of up to 12 GB per minute. Its dual-signal design supports both NVMe and SATA M.2 SSDs, and cross-signal duplication is also available (Subject to driver and execution path limitations)
4 Duplication/ Copy Modes to easily copy your M.2 Media
-
Quick Copy: Automatically copies only the data area. Supports Windows (FAT16/32/exFAT/NTFS), Linux (ext2/ext3/ext4/LVM), and Mac (HFS/HFS+/HFSX) file systems. This it the fastest and most efficient duplication mode that would detect and copy only the occupied area,
-
Whole Media Copy: Performs a bit-by-bit copy from the initial sector to the end of the drive. This creates a verbatim copy of the media and even copies the blank sectors.
-
All Partitions Copy: Copies all the partitions, skipping any undefined areas or unallocated spaces
- Percentage Copy: Allows you to set a percentage of the source capacity to copy.
Data Integrity Verification after Copy Job
Ensuring the accuracy of your copies is crucial. The duplicator verifies copied data with a bit-by-bit comparison to guarantee successful duplication using CRC64 Data Verification once the duplication is complete
Copy/Duplication Speed
The U-Reach PV Series PCIe SSD duplicator can copy data at speeds of up to 12 GB/min across all connected drives. Its not a shared speed but rather each target individually can reach upto this duplication speed. So your net speed could reach 12GB x number of targets
No Waiting Time Between Duplication Rounds
Duplication rounds can be started immediately after the previous round completes, with no need to wait or restart the machine.
Supported Interfaces
Supports M.2 PCIe M Key and M.2 B+M Key interfaces, and is compatible with all sizes of NVMe M.2 SSDs (Types 2280/2260/2242/2230/22110).
it supports both NVMe and SATA protocols and allows for copy between the 2 also.
Sanitization Functions
This duplicator also doubles up as a data sanitizer with its erase function. 3 Erase functions are available including the 3 pass erase that complies with NIST SP 800-88r1 and DoD 5220-M standards, offering secure erase options that wipe drive contents within seconds.
- Secure Erase : If your drive supports secure erase, then you can use this superfast erasure method. It essentially deletes the encryption key from your drive using the SE command
- Full Erase (Single Pass) : This will rewrite across your entire drive length once.
- DOD Erase ( 3 pass) : This the most robust way of erasure in which data is rewritten 3 times across your entire drive length.
Skip Bad Sectors During Copy
Users have the option to skip bad sectors during the erasure process to make the process faster
*Note: When performing cross-signal duplication of operating systems, be aware of potential .
Models | PV400E : 1:3 Duplication PV800 : 1:7 Duplication PV1200 : 1:11 Duplication PV2400 : 1:23 Duplicatoin |
||
Specifications | |||
Max. Transfer Speed | PV400E: 9.0 GB/min (150 MB/sec) PV800; PV1200; PV2400: 12.0 GB/min (200 MB/sec) *Actual performance is dependent on device transfer rate. |
||
Supported Formats | All Partitions/Whole HDD/Percentage: copies all types of formats, both known and unknown. | ||
Quick Copy: copies FAT16/32/exFAT, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (ext2/ext3/ext4). | |||
Operating Type | Stand-alone, non PC-based operation | ||
Language Support | English, Japanese | ||
LCD Display | Backlit Monochrome LCD Display | ||
LEDs | 3 LED Indicators per Port: Yellow (Power), Green (Pass), Red (Fail) |
||
Control Panel | 4 Push Buttons (▲, ▼, OK, ESC) | ||
Features | Copy Modes | Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy | |
Skip Bad-Sectors | Manually set (Bad sector) threshold range to skip during copy and erase process. | ||
Compare Function | Bit-for-bit data comparison. | ||
Sanitization Modes | Quick Erase, Full Erase, DoD Erase, and Secure Erase | ||
Compatibilities | Compatible Protocol | NVMe, AHCI, SATA | |
Compatible Device | w/o Adapters | M.2 (NGFF) M Key & B+M Key. | |
w/ Adapters | MAC PCIe, BGA SSD etc. | ||
Advanced Formats | Supports MBR, GPT, and advanced formats. | ||
Hardware Specifications |
Power Supply | Selectable Voltage 115V or 230V, 50/60Hz | |
Temperature Range | Operating Temperatures: 5°C ~ 45°C Storage Temperatures: -20°C ~ 85°C |
||
Humidity Range | Working Humidity: 20% ~ 80% Storage Humidity: 5% ~ 95% |
||
Certification | FCC, CE, RoHS |