SP Series: NVMe / SATA 1 to 1 M.2 and SATA SSD Duplicator

The SP series is the world’s first standalone duplicator that supports NVMe, AHCI, and SATA protocols. It automatically detects device signals and supports ultra-high-speed duplication

Features

• Cross-signal and cross-interface Duplication: Automatically detect different signals of each port, making it easy to copy from SATA to NVMe M.2 and vice versa.*
• Controller Design: The embedded controller is designed to support capacities over 18TB+. Constant improvements ensure support for the latest market-available devices.
• Read-Only Source Port: This built-in feature is integrated with all U-Reach duplicators and cannot be disabled.
• Non-PC Based, Hot-swapping Supported: Each job can start immediately after the previous one is completed, with no waiting time required and no need for a system restart.
• Modularized Socket Design: Modular-designed M.2 ports effectively reduce downtime and are cost-effective for long-term ownership.

*Note: While performing cross-signal copy of the OS system, please be aware of the limitation of drivers and execution path.

Product Models

Standard Package

• Duplicator x 1
• 12V 5A Adaptor x 1
• Power Cord x 1
• User Manual x 1
• SATA Cable (6cm) x 2
• 1 pair of Gloves
• **Pad x 2

**Wear protective gloves to prevent burns when handling devices.

Optional Accessories

• mSATA to SATA Adapter
• CFast to SATA Adapter
• M.2 Socket MAC PCIe SSD Adapter

Specifications

• Maximum Speed Supported:
  • SP101: 9.0 GB/min (150 MB/sec)
  • SP151: 24.0 GB/min (400 MB/sec)

  *Actual performance is dependent on device transfer speeds*

• Supported Formats:
  • Quick Copy (System and Files): FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS/HFS+/HFSX)
  • Whole Device Copy: All formats, including proprietary formats.
  • GPT, MBR, and Advanced Formats.
• Supported Capacity: Over 18TB+.
• Supported OS: All (Windows, Mac, Linux, and other proprietary systems).
• Operation Mode: Standalone, FPGA-based Operation.
• Language Support: English, Japanese.
• Hardware Specifications:
  • LCD Display: 2x20 Backlit Monochrome LCD Display
  • LEDs: 3 LED Indicators per Port: Yellow (Power), Green (Pass), Red (Fail)
  • Control Panel: 4 Push Buttons (▲, ▼, OK, ESC)
  • Power Requirements: 12V 5A Power Adaptor
  • Temperature: Working: 5°C ~ 45°C; Storage: -20°C ~ 85°C
  • Humidity: Working: 20% ~ 80%; Storage: 5% ~ 95%
  • Certifications: FCC, CE, RoHS, and Reach
• Functions:
  • Copy Modes: Quick Copy (System and Files) / All Partitions / Whole Device / Percentage Copy
  • Compare (Verification): Bit-by-bit data comparison from the source device to target device(s).
  • Sanitization Modes: Quick Erase, Full Erase (NIST 800-88), DoD Erase (DoD 5220.22-M), and Secure Erase (NIST 800-88).
  • Skip Bad Sectors: Skip the number of bad sectors during Copy/Compare/Erase.

***Specifications subject to change without notice.