Find anything you need
The QDA-SA adapter is designed for QNAP and allows the use of a SATA 6Gbps drive in a 3.5-inch SAS drive bay - providing the ability to expand storage capacity by using cost-effective SATA drives.
Note: QDA-SA adapters are sold in a pack of four. (Order number: QDA-SA-4PCS)
Supports 3.5-inch or 2.5-inch SATA drives.
Up to 6 Gb/s file transfer speeds.
The installed SATA drive can share SAS dual-port advantages for higher reliability.
Note: The connected drive may not reach its optimal performance due to protocol translation and some overhead.
SAS features dual porting for redundancy, eliminating single points of failure and allowing for higher reliability and performance. By installing a SATA drive with the QDA-SA into a dual-controller Enterprise ZFS NAS, the SATA drive can share these SAS dual-port advantages to ensure a high-availability, fault tolerant enterprise storage environment.
The QDA-SA is easily installed in the 3.5-inch disk tray of an (Disk tray model: ). (QES 2.0.0 (or later) is required for the NAS)
Note: QDA-SA does not support SSD TRIM and the drive S.M.A.R.T. feature is not supported on non-QES operating system.
Use two M.2 PCIe NVMe SSD in a U.2 PCIe NVMe SSD drive bay for PC and NAS
Faster USB transfers
High-Bandwidth, Full Duplex 12Gb/s SAS Card
2.5-inch 6Gbps SAS to SATA drive adapter (Designed for dual-controller all-flash ES2486dc NAS)
High-Bandwidth, Full Duplex 12Gb/s SAS Card
Install an M.2 PCIe 4.0 NVMe SSD in a U.2 PCIe NVMe SSD slot for PC and NAS
Use two M.2 PCIe NVMe SSD in a U.2 PCIe NVMe SSD drive bay for PC and NAS
Faster USB transfers
High-Bandwidth, Full Duplex 12Gb/s SAS Card
2.5-inch 6Gbps SAS to SATA drive adapter (Designed for dual-controller all-flash ES2486dc NAS)
High-Bandwidth, Full Duplex 12Gb/s SAS Card
Install an M.2 PCIe 4.0 NVMe SSD in a U.2 PCIe NVMe SSD slot for PC and NAS
Screw pack for QDA-SA intallation, 96 pieces, Flat head machine screw
Dimension (L × W × H): 13.00 × 11.50 × 0.30 (cm)
Weight: 0.03 (kg)
