2.8x Faster Connectivity

The QXP-W6-AX200 dual band Wi-Fi 6 PCIe card supports 802.11ax 160MHz dual band connectivity, 1024-QAM and up to 2400Mbps connection speed which is 2.8 times faster than Wi-Fi 5(802.11ac).

Notes:
1. Wi-Fi speed and connection quality may vary based on network traffic, environmental factors, Internet speed, client device performance, and the number of other Wi-Fi and radio signals in the immediate area.

Easy Access with a Wireless NAS

With a QXP-W6-AX200 installed in your NAS, you can free yourself from Ethernet cables and access all your stored files and multimedia over a high-speed wireless connection. A full-height bracket is pre-installed on the QXP-W6-AX200 and two low-profile brackets are also included.

Notes:
1. System requirements: 64-bit x86-based NAS (Intel and AMD), or ARM-based NAS, with QTS 4.4.3 (or later) with a PCIe Gen 2x1slot. for a full list of compatible NAS.
2. Some NAS models must update their BIOS to the following versions. You can download BIOS from the and .
• TS-251B: Q015AR02
• TS-653B: QY59AR58
• TS-251D, TS-253D: Q04WAR08
• TS-453D, TS-653D: Q04MAR12
• TS-453DU, TS-453DU-RP, TS-853DU-RP, TS-1253DU-RP: Q05PAR03

Easily Set Up a NAS Wireless Network Connection

After installing the QXP-W6-AX200 in your NAS, use Network & Virtual Switch or Qfinder Pro to set up the Wi-Fi connection, guest network environment or captive portal.

Notes:
1. Browser Station requires an x86 NAS with at least 4GB RAM.
2. If the connected Wi-Fi AP blocks the network segment under NAT, the captive portal may not automatically appear.

• Use Network & Virtual Switch

  Open Network & Virtual Switch: Select the designated SSID and enter the password to connect your NAS to wireless network.

• Use Qfinder Pro

  Open Qfinder Pro: Select the designated SSID and enter the password to connect your NAS to the wireless network.

• Use Browser Station to open a captive portal

  Using Network & Virtual Switch or Qfinder Pro: Select the SSID and open Browser Station to enter a password for the captive portal.

Upgrade Your Windows® or Linux® PC with High-speed Wireless Networking!

The QXP-W6-AX200 is not just for NAS, it can be installed in a Windows® or Linux® PC to provide Wi-Fi 6 connectivity for enabling faster downloading speeds and low-latency connectivity.

Notes:
1. The QXP-W6-AX200 supports 64-bit Windows® 10 and Linux® PC. You can download and from the Intel website.

Dual Band Antenna with Better Wi-Fi Signals

The QXP-W6-AX200 features a new antenna design that provides better Wi-Fi signals and transmission speeds.

• 

  Supports dual band 802.11ax 2.4GHz & 5GHz and provides better signal strength compared to traditional antenna designs.

• 

  The smart antenna function provides superior WI-FI signal transmission.

• 

  The multiple angle tilt and magnetic base allows you to get the best signal strength direction and location.

Add Bluetooth 5.0 to Your Windows® PC

When installed in a Windows® PC, the QXP-W6-AX200 provides Bluetooth® 5.0 connectivity. Please note that this requires connecting the QXP-W6-AX200 to an F_USB connector on your motherboard using the included USB cable.

Use with a Wi-Fi 6 Dual-port 10GbE QHora Router

The QNAP QHora Wi-Fi 6 dual-port 10GbE router fulfills wireless and wired networking for homes and businesses alike, making it easy to create affordable high-speed networking.

* Brand and product names mentioned are trademarks of their respective companies.