QNAP QXG-100G2SF-E810

Ensure reliable data transfer with Forward Error Correction (FEC)

The QXG-100G2SF-E810 supports FEC to overcome packet loss – a potentially common occurrence in fast, long-distance networks. FEC helps the receiving side detect and recover lost data to correct bit errors, thus ensuring reliable data transmission over “noisy” communication channels. With three FEC modes, you can use a suitable cable and switch to build an optimal network environment.

1. The transmitter (source) and the destination (receiver) must use the same mode.
2. If the QXG-100G2SF-E810 cannot connect to the switch, please check if the latest firmware of the switch supports FEC. If FEC is not supported by the switch, the FEC function of the NIC should be disabled using the NAS or computer operating system.

Pair with high-speed switches for high-performance, low-latency data centers

The QXG-100G2SF-E810 network expansion card can be connected to a switch either with a QSFP28 cable or a QSFP28 to (4) SFP28 cable. You can also configure network redundancy to achieve network failover via the switch for continuous service and high availability.

• 100GbE to 100GbE

  Use a 100GbE switch. Set one 100GbE connection as the main route and the other 100GbE as a backup route.

• 100GbE to 2 x 2 x 25GbE
  (Available in QTS 5.0/QuTS hero 5.0)

  Use a 25GbE switch and two QSFP28 to (4) SFP28 cables to connect the 100GbE port on the QXG-100G2SF-E810 to four 25GbE ports on the switch. Set a group of connections as the main route and the other as a backup route.

• 100GbE to 2 x 4 x 10GbE
  (Available in QTS 5.0/QuTS hero 5.0)

  Use two QNAP 10GbE switches and two QSFP28 to (4) SFP28/SFP+ cables to connect the 100GbE port on the QXG-100G2SF-E810 to four 10GbE ports on the switches. Set a group of connections as the main route and the other as a backup route.

• 100GbE to 4 x 25GbE
  (Available in QTS 5.0/QuTS hero 5.0)

  Use a 25GbE switch and a QSFP28 to (4) SFP28 cables to connect the 100GbE port on the QXG-100G2SF-E810 to four 25GbE ports on the switch.
  
  Note: The breakout cable must be connected to the 100GbE port nearest to the gold finger.

Unleash the full potential of the NVMe all-flash TS-h2490FU

Supporting twenty-four (24) U.2 NVMe Gen 3 x4 SSDs, QNAP’s flagship TS-h2490FU NVMe all-flash storage features a PCIe Gen 4 x16 slot that enables the QXG-100G2SF-E810 to fully realize 100Gbps performance and eliminate bottlenecks in modern data centers, virtualization, cloud applications, and mission-critical backup/restore tasks.

Supports Windows and Linux servers/workstations

Besides QNAP devices, the QXG-100G2SF-E810 supports many platforms (including Windows Server® 2016 and 2019, and Linux®/Ubuntu®) allowing you to attain optimal business performance for a wider range of system applications and services. The higher bandwidth density with reduction in links helps reduce cabling footprint and operational costs.

• 

  Faster server connections within data centers accelerate data aggregation and operational performance.

• 

  Boost the productivity of compute-demanding tasks such as cloud computing, virtual machines, containers, and more.

• 

  Empower the movement of large files from surveillance streams, 4K/8K media, Internet of Things, and more.

Always consult the before purchasing add-ons and accessories for your NAS.

Note: QNAP Network Expansion Cards do not support Wake-On-LAN (WOL).

Get the best DAC cables for your work environment